PH3 sensor module Introduction
The PH3 Sensor Module is a specialized device designed for the detection and monitoring of phosphine (PH3) gas concentrations in various environments. Phosphine is a highly toxic and flammable gas that can pose significant health and safety risks, particularly in industrial settings where it may be generated as a byproduct of certain processes.
Product Features:
(1)The whole machine is small in size, light in weight, easy to install, only 10g, and can be used in portable, fixed, pipeline and other appearance sensors.
(2)With temperature compensation function, factory accurate calibration, direct use, no need to use calibration.
(3)Intrinsically safe circuit design, plug and play. The sensor life can be protected after power failure.
(4)Support RS485, analog voltage, TTL serial port and other interface output mode.
Product images and details:
Product Parameters:
| Monitor gas | model | Range | Detection principle |
|---|---|---|---|
| oxygen | JXM-O2 | 0-30% (default) | Electrochemistry |
| O3 | JXM-O3 | 0-10ppm (default) 0-1000ppm (Optional) | Electrochemistry |
| SO2 | JXM-SO2 | 0-20ppm (default) 0-2000ppm (Optional) | Electrochemistry |
| JXM-SO2-103 | 0-1W/0-10Wppm | NDIR | |
| CH4 | JXM-CH4 | 0-100% (default) | Catalytic combustion |
| JX-CH4-103 | 0-10W/20W 50W/100Wppm | NDIR | |
| Freon | JXM-Freon | 10-100 ppm | Electrochemistry |
| H2 | JXM-H2 | 0-100% (minimum) | Catalytic combustion |
| HCN | JXM-HCN | 0-50ppm (minimum) | Electrochemistry |
| NH3 | JXM-NH3 | 0-100ppm(default) 0-1000ppm(Optional) 0-5000ppm(Optional) | Electrochemistry |
| HCL | JXM-HCL | 0-50ppm (minimum) | Electrochemistry |
| Cl2 | JXM-Cl2 | 0-20ppm (minimum) | Electrochemistry |
| C6H6 | JXM-C6H6 | 0-100ppm (minimum) | Electrochemistry |
| F2 | JXM-F2 | 0-1ppm (minimum) | Electrochemistry |
| C2H6O | JXM-C2H6O | 0-1000ppm (minimum) | Electrochemistry |
| PH3 | JXM-PH3 | 0-20ppm (default)/0-2000ppm (optional) Electrochemistry | Electrochemistry |
